Volvo NAVIGATION SYSTEM (VNS) Operating Manual page 60

03 Advanced user mode
Settings
Reset to default
Return to the system's factory settings for
route options.
•
Press , select OK
NOTE
03
When the system calculates a route over
longer distances, it is designed to select
major roads (highways/freeways, etc.).
If you have set the system to avoid highways
and toll roads, the system will avoid guiding
you to these types of roads to as great an
extent as possible, and will only use such
roads when no other reasonable alternative
is available.
Map options
Select the way in which the map is displayed.
60
Settings
•
Move among the functions with the
navigation control and press ENTER to
and press ENTER.
save.
POI selection
•
Press
– Select
the map.
– Select
–
Select
the symbols to be displayed on the map. The
symbols selected to be displayed will be
marked with an X.
•
Select or unselect symbols with
and press ENTER to save.
Map options
to access a sub-menu.
Show to display all POI symbols on
Hide to show no POI symbols.
Show selected
and press to select
or
Map
Select Show or Hide . If the map is hidden, the
system will use an arrow for guidance.
Right map view
Choose to display the map in 2D (two dimen-
sional - straight from above) or 3D (three-
dimensional - angled from above).
•
3D
When is selected, the vehicle's direc-
tion is always toward the top of the screen.
•
When 2D is selected, choose whether
Heading or 2D North is to be at the top of
the screen.
Selecting elevation angle.
Settings Map Map view
After selecting 3D with or
the panel for selecting the elevation angle will
be displayed. Select the desired angle with
or followed by ENTER and BACK.
2D
3D
and ENTER,