Volvo NAVIGATION SYSTEM (VNS) Operating Manual page 50

03 Advanced user mode
Setting a destination
Search using a Zip code
03
Set destination Address
Instead of searching in a city, you can opt to
search for an area's Zip code.
1. Go to ZIP code
and press ENTER.
2. Select the digits in the Zip code and press
ENTER
or
Select a Zip code from the list.
3. Go to
Street to select a street with the Zip
code entered and press ENTER.
4. Go to Start guidance
directions to the destination.
50
NOTE
This also applies to searches using Points
of interest.
Point of Interest (POI)
City
Set destination
Points of interest (POI) include gas stations,
hotels, restaurants, Volvo retailers, hospitals,
parking lots, etc.
•
Press ENTER to access a sub-menu with
different search options in order to select a
point of interest.
to begin receiving
POI by name
Enter the name of the point of interest, or select
an alternative in the menu. The list only shows
the points of interest in the selected city/area.
Around the car
The system will search for POIs around the car
(max. 60 mile radius) The search will stop after
POI
40 POIs have been found.
Along the route
If a destination has been selected, the system
can search for points of interest along the route
(within approx. 0.5 miles from the route).
Around point on map
The system will perform the same type of
search as for
will be based on a point on the map.
Along street
The system will search along a specified street.
Around the car , but the search