Delete A Contacts Entry; Add A Number To A Contacts Entry; Assign A Ringer To A Contacts Entry - Kyocera Kona User Manual

2. Highlight the entry you want to edit and press OPTIONS (right softkey) > Edit Contact
or Edit Group.
3. Highlight the information you wish to edit.
4. Add or edit the information and press
5. Press DONE (left softkey) or SAVE (left softkey) to save your changes.

Delete a Contacts Entry

You can delete existing entries from your Contacts.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight an entry or a group you want to delete.
3. Press OPTIONS (right softkey) > Delete Contact or Delete Group.
4. Press DELETE (left softkey) or YES (left softkey).

Add a Number to a Contacts Entry

You can add numbers to existing entries in your Contacts.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to add a number to and press OPTIONS (right softkey) >
Edit Contact > <Add Number>.
3. Enter the new number and press
4. Highlight a label for the number and press
5. Press DONE (left softkey) to save the new number.

Assign a Ringer to a Contacts Entry

Assign a ringer to a Contacts entry so that you can identify the caller by the ringer. See
Settings.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight an entry and press
3. Select Set Ringers > Incoming Calls or Message.
4. Select Change.
Contacts
.
.
.
.
50
Ringer