Making The First Call - KVH Industries TracPhone FB250 User Manual

Chapter 2: Getting started

Making the first call

Introduction
When the Antenna and Terminal indicators in the LED panel on the terminal
both light steady green, you are ready to make or receive the first call.
The following sections provide a short guide to making calls. For more
detailed information, see Making or receiving a phone call on page 42.
Making a call from the terminal
To make a call from a phone or handset connected to the terminal, dial
00 <country code> <phone number> followed by # or off-hook key.
Example: To call the number +45 39558800 from an analog phone,
dial 00 45 39558800 #
Making a call to the terminal
Note
By default all handsets connected to the terminal will ring on
incoming calls. If you have connected a fax, set the incoming call
type on that Phone/Fax interface to 3.1 kHz Audio to avoid that the
fax rings and answers an incoming Standard call. For further
information, see Selecting the call type on page 39.
To make a call to a phone connected to the terminal, dial
+ <Mobile number>
• + is the prefix used in front of the country code for international calls.
32 Making the first call