Bios Setup; Bios Overview - Intel CH-486-33A User Manual

The SETUP program is used to configure the system. These
system options are stored in the CMOS. If the CMOS is good,
the system is configured with the values stored in the CMOS. If
the CMOS is bad, the system is configured with the default
values stored in the ROM file.
There are two (2) sets of BIOS values stored in the ROM file
The BIOS Setup default values
The Power-On default values
The BIOS Setup default values are the default values which are
supposed to give optimum performance for the system. They
are the best case default values.
The Power-On default values are the default values for the
table values for the system. They are the worst case default
values.

BIOS SETUP

3-l