Cd _In Connectors; Serial Ata Connectors - Fujitsu PTM900 Manual

PTM900 Mainboard Manual
(4) Power Button is connected with the power button. Pushing this switch allows the
system to be turned on and off rather than using the power supply button.

CD _In Connectors

The CD_IN connector is for CD-ROM drive audio analog input use. The pin
assignment are: Pin 1 is Left, Pin2 and 3 are GND, Pin 4 is Right.

Serial ATA Connectors

The 2 SATA connectors provide you with the
connections to serial ATA devices that confirm
to the Serial ATA specification. Serial ATA
supports all ATA and ATAPI devices. The
figures below left are two SATA cables (the top
one is for power; the next one is for data). The
data cable pin assignments of SATA connector.
2- 11