Get Your Device Ready; Install The Battery; Charge The Battery - Kyocera Milano User Manual

Get Your Device Ready

Install the Battery

1. Hook your fingernail into the slot at the bottom of
the battery compartment cover (1), and lift the cover
off gently (2).
2. Insert the battery, contacts end first, and gently press
into place (3).
3. Replace the cover, making sure all tabs have seated
and there are no gaps (4).
1
3
2
4
visit sprint.com/support for complete user guide

Charge the Battery

1. Plug the smaller end
of the micro-USB
cable into the charger/
accessory jack on the
left side of your device.
2. Plug the other end
of the USB cable into
the charger.
Turn the Device On
Press and hold the
► ►
Power button to turn
your device on.
Power button
1