Hitachi CP-X2011N User Manual page 13

Connecting with your devices (continued)
To use network functions of the projector, connect the LAN port with the
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function,
also connect the CONTROL port and an RS-232C port of the external device to
communicate as a network terminal. See the User's Manual - Network Guide for
details of the network functions.
Access point
USB
TYPE A
DC5V 0.5A
LAN
CAUTION
to obtain the consent of the administrator of the network (
►Do not connect the LAN port to any network that might have the excessive voltage.
NOTE • If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
Computer
HDMI
USB
TYPE B
MIC
AUDIO
Cr/Pr
L
L
IN1
Cb/Pb
IN3
OUT
IN2
R R
►Before connecting the projector to a network system be sure
RS-232C
LAN
COMPUTER IN1
VIDEO
MONITOR OUT
S-VIDEO CONTROL
Y
Setting up
COMPUTER
IN2
60).
13