Cleaning Tools; Stair Cleaning; How To Clean Tools - Hoover Bagless Upright Owner's Manual

2-9

Stair cleaning

A stair cleaning handle has been
designed for ease in using your cleaner
on stairs.
With handle in operating position, place
fingers under edge of stair cleaning
handle and guide cleaner with other
hand on upper handle.
As an alternative, you may use the hose
and furniture nozzle for stair cleaning.
When using cleaning tools, the
agitator will continue to rotate.
CAUTION: To avoid personal injury or
unnecessary wear to carpet, and to
prevent the cleaner from falling, use
extra care when cleaning stairs.
2-11
A
C
B. Select proper clean-
ing tool
A. Dusting brush can be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
B. Furniture nozzle can be used
for upholstered furniture, draperies,
tapestries, mattresses, clothing,
automobile interiors, and carpeted
stairs.
C. Crevice wand can be used in tight
spaces, corners and along edges in
such places as dresser drawers, uphol-
stered furniture, stairs, and baseboards.
It can also be used for extra reach with
the dusting brush and/or extension
wand.
D. Extension wand is used to give extra
length to your hose. Attach it to any of
the above tools.

Cleaning tools

Tools allow you to clean surfaces above
the floor and reach hard to clean areas.
Use tools with the cleaner handle in
upright position. This will ensure that
the nozzle is lifted off the floor slightly.
C AU T I O N : Agitator continues to ro t a t e
while cleaner handle is in upright
p o s i t i o n . Avoid tipping cleaner or
setting it on furniture, f r i n ged area
r u g s , or carpeted stairs during tool
u s e.
2-12
B
D
C. Attach wand and
tools
The tools are attached to the hose or the
wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connection.
The dusting brush (A) can also be
attached to the crevice wand as shown.
2-10
A. Move carpet height
control
Slide carpet height control to the
Cleaning Tools setting to divert suction
to the hose and cleaning tools.
Return control to floor settings when
tool use is complete .
How to clean
A
tools
To clean the hose, wipe off dirt with a
cloth dampened in a liquid detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air
dry before using.
7