MODELS: LT-40133 / LT-46133 / LT-52133 / LT-40134 / LT-46144 / LT-52144 / LT-46244 / LT-52244
Chassis Disassembly
PWB-DM Cover Removal
1) Remove screws (F) to remove the LVDS Cover.
2) Remove screws (E) to remove the DM-COVER and EARTH PLATE.
3) Lift the PWB-DM Cover from the unit.
PWBs Power, Signal & DM Removal
1) PWB-POWER remove (10) screws (D).
2) PWB-SIGNAL remove 6 screws (C).
3) PWB-DM remove 3 screwS (A) from the end bracket and service connector cover,
and screws (B) from the PWB-DM.
NOTE: Additional disassembly required in LT-52244 (See following page)
Page 10