Connecting To Wan/Lan; Connecting With External Power; Switching On Your Device; Power Supply - Zte MF29A User Manual

Connecting to WAN/LAN

Connect WAN with an Ethernet cable (RJ45).

Connecting with External Power

Connect the external power adaptor to a standard power outlet. Insert the plug into the socket at the rear of
the router.

Switching on Your Device

1. Turn the power switch on to get started. Make sure that the phone is on hook before power on.
Notes:
Do not put anything on the top of the router. Do not lay routers to overlap each other when using.
2. Wait 1～2 minutes after turning the router on before you use the service. The 3G & POWER indicator
should be lit on.
Notes:
When the router is turned off, an incoming caller will hear the prompt like "The number you have dialed
is currently unavailable."
If the 3G LED is blinking constantly, try to move the router to another location. The router takes 1~2
minutes to initialize, attach to the network and obtain an IP address.

Power Supply

For normal operation, connect the router to the external power adapter. In case of power failure or when
there is no available external power supply, the router will not work.
6