Set Up; Unpacking; Piece Inventory - Grizzly G0505 Instruction Manual

Unpacking

The Model G0505 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you have signed for
delivery, and the truck and driver are gone, you
will need to file a freight claim with the carrier.
Save the container and all packing materials for
possible inspection by the carrier or its agent.
Without the packing materials, filing a freight
claim can be difficult. If you need assistance
determining whether you need to file a freight
claim, or with the procedure to file one, please
contact our Customer Service.
The Model G0505 weighs
approximately 71 lbs. DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance or use a fork
lift.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
-8-
SECTION 5: SET UP
after they are

Piece Inventory

After all the parts have been removed from the
carton, you should have:
• Planer
• Chip Deflector
• Handle
• 8-10 mm Wrench
• Knife Gauge
• Hardware
—Cap Screw M5-.8 x 20mm ..................(1)
—Wing Nuts M5 ......................................(2)
—Washers M5 ........................................(2)
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
NOTICE
A full parts list and breakdown can be found
towards the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.
G0505 12 1 ⁄ " Lean & Mean Portable Planer
2
QTY