Supermicro H8SSL-i User Manual page 46

Table of Contents

Advertisement

H8SSL-i User's Manual
PIO Mode
PIO (Programmable I/O) mode programs timing cycles between the IDE drive
and the programmable IDE controller. As the PIO mode increases, the cycle
time decreases. The options are Auto, 0, 1, 2, 3, and 4. Select Auto to allow
AMI BIOS to auto detect the PIO mode. Use this value if the IDE disk drive
support cannot be determined. Select 0 to allow AMI BIOS to use PIO mode
0. It has a data transfer rate of 3.3 MBs. Select 1 to allow AMI BIOS to use
PIO mode 1. It has a data transfer rate of 5.2 MBs. Select 2 to allow AMI
BIOS to use PIO mode 2. It has a data transfer rate of 8.3 MBs. Select 3 to
allow AMI BIOS to use PIO mode 3. It has a data transfer rate of 11.1 MBs.
Select 4 to allow AMI BIOS to use PIO mode 4. It has a data transfer rate of
16.6 MBs. This setting generally works with all hard disk drives manufactured
after 1999. For other disk drives, such as IDE CD-ROM drives, check the
specifi cations of the drive.
DMA Mode
Select the DMA mode of the drive. Options are SWDMA0, SWDMA1, SWD-
MA2, MWDMA0, MWDMA1, MWDMA2, UDMA0, UDMA1 and UDMA2.
S.M.A.R.T.
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select "Auto" to allow BIOS to auto detect hard
disk drive support. Select "Disabled" to prevent AMI BIOS from using the
S.M.A.R.T. Select "Enabled" to allow AMI BIOS to use the S.M.A.R.T. to sup-
port hard drive disk. The options are Disabled, Enabled, and Auto.
32-Bit Data Transfer
Select "Enabled" to activate the function of 32-Bit data transfer. Select "Dis-
abled" to deactivate the function. The options are Enabled and Disabled.
Hard Disk Write Protect
Select Enabled to enable the function of Hard Disk Write Protect to prevent data
from being written to HDD. The options are Enabled or Disabled.
IDE Detect Time Out (Sec)
This feature allows the user to set the time-out value for detecting ATA, ATA PI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30
and 35.
4-4

Advertisement

Table of Contents
loading

Table of Contents