Top Air Chamber Extension - Avalon Olympic 11190 Owner's Manual

18 Fireplace Insert Installation

Top Air Chamber Extension

The top air chamber extension is shipped separately with the heater and may be installed when the heater is
used as an insert (see "Standard Model" under Insert Placement and Fireplace Requirements). Follow the
directions below to install.
1. Remove the grill. Remove and discard the bypass extension rod (keep the pull ring).
Phillips
Screwdriver
2. Install the top air chamber extension following the directions below.
Attach the top air chamber
extension using the screws
included in the owner's pack.
Phillips
Screwdriver
3. Attach the grill to the air chamber top. Attach the bypass extension rod included in the owner's kit to the
damper yoke. Attach the bypass pull ring to the extension rod to complete the installation.
© Travis Industries
Remove the grill.
Remove and discard the bypass extension rod
attached to the stove (keep the pull ring).
(for qualified installers only)
93508061 4050526