To adjust the seat, do any of the following:
•
Move the seat forward or rearward by sliding
the control forward or rearward.
•
Raise or lower the front part of the seat
cushion by moving the front of the control up
or down.
•
Raise or lower the rear part of the seat
cushion by moving the rear of the control up
or down.
•
Raise or lower the entire seat by moving the
entire control up or down.
Power Lumbar
Driver's Seat with Power Seat, Power Lumbar,
and Manual Recline shown
Your driver's seat may have power lumbar.
The control is located on the outboard side of the
seat cushion.
Press the control forward to increase lumbar
support. Press the control rearward to decrease
lumbar support.
Keep in mind that as your seating position changes,
as it may during long trips, so should the position of
your lumbar support. Adjust the seat as needed.
9