Advertisement
2. Software Installation
2.1. Windows 2000 installation
1. Insert the card into an available ExpressCard slot
2. Windows will display the 'Found New Hardware Wizard', 'Ethernet controller'.
Click 'Next'
3. Select 'Search for a suitable driver for my device (Recommended)' and click
'Next'. Make sure the driver CD is in your CD-ROM/DVD drive
4. Check 'Specify a location', uncheck the other boxes and click 'Next'
5. Type in E:\ (If your CD-ROM/DVD is E:\) and click 'Browse'
6. Specify the driver location,
e.g. E:\10_100_1000NIC\Marvell_Yukon\Windows\WIN2000 and click 'OPEN',
then 'OK'
7. When the wizard indicates that it has found a driver for the device click 'Next'.
Click 'Finish'
2.2. Windows 2003 Server installation
1.
Insert the card into an available ExpressCard slot
2.
Windows will display the 'Found New Hardware Wizard', 'Ethernet controller'
3.
Select 'Install from a list or specific location (Advanced)' and click 'Next'.
Make sure the driver CD is in your CD-ROM/DVD drive.
4.
Select 'Search for the best driver in these locations' and check 'Include this
location in the search:'. Uncheck the other boxes.
5.
Type in E:\ (If your CD-ROM/DVD is E:\) and click 'Browse'
6.
Specify the driver location,
e.g. E:\10_100_1000NIC\ Marvell_Yukon\Windows\WIN2003 and click 'OPEN',
then 'OK'
7.
When the wizard indicates that it has found a driver for the device click 'Next'.
Click 'Finish'
Advertisement
