OVERVIEW The CP900EPFCLCD provides automatic voltage regulation for inconsistent utility power. The CP900EPFCLCD features 405 Joules of surge protection, and provides battery backup during power outages. The CP900EPFCLCD ensures consistent power to your computer system and its included software will automatically save your open files and shut down your computer system during a utility power loss.
2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does not exceed the UPS unit's rated capacity (900VA/540W for CP900EPFCLCD). If the rated unit capacities are exceeded, an overload condition may occur and cause the UPS unit to shut down or the circuit breaker to trip.
Located on the back of the UPS, the circuit breaker serves to provide overload and fault protection. 10. USB Port to PC This port allows connection and communication from the USB port on the computer to the UPS unit. ® The UPS communicates its status to the PowerPanel Personal Edition software.
Reduce Energy Cost with GreenPower UPS Technology CyberPower’s goal is not only to provide eco-friendly products but also to bring the best value for consumers. The advanced energy-saving design improves the operating efficiency and eliminates waste energy consumption. As a result, consumers will enjoy significant energy cost savings with the adoption of GreenPower UPS technology.
Energy-Saving: The UPS in energy-saving bypass mode. See “CyberPower GreenPower UPS Technology” section for more information. LOAD capacity / Sensitivity setup: This meter displays the approximate output load level (in 20% increments) of the UPS battery outlets.
Page 7
F01: Battery Mode or AC/Utility Power Mode Overload fault (Turn on the UPS again.) F02: Battery Output Short fault (Turn on the UPS again.) F03: Charger Fault (Contact CyberPower Systems for support.) F04: Internal Fault (Contact CyberPower Systems for support.) OVER LOAD: This icon appears and an alarm sounds to indicate the battery-supplied outlets are overloaded.
TECHNICAL SPECIFICATIONS Model CP900EPFCLCD Capacity (VA) 900VA/540W Input Frequency Range 47~63Hz (Auto Sensing) AVR Function Output On Battery Output 230Vac +/-10% Voltage On Battery Output 50/60Hz +/-1% Frequency Transfer Time 4ms Typical Overload Protection On Utility: Circuit Breaker, On Battery: Internal Current Limiting...