Saeco Energica Focus HD8852 User Manual page 65

Help Message Displayed
TURN CARAFE
INTO
BREWING POSITION
ESC
TURN CARAFE
INTO
RINSING POSITION
ESC
INSERT CARAFE
ESC
RESTART TO SOLVE
INSERT WATER SPOUT
ESC
How to Reset the Message
Open the milk dispenser of the carafe to brew products.
Press the button "ESC" to exit.
Close the milk dispenser of the carafe to start the rinsing cycle of the
carafe.
Press the button "ESC" to exit.
Insert the milk carafe to start brewing. Press "ESC" to exit.
The machine needs to be descaled. Follow the steps described in the
"Descaling" chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
The machine needs the "INTENZA+" water fi lter to be replaced.
Red light fl ashes. Press the "
Take note of the code (E xx) shown in the display at the bottom.
Turn off the machine. After 30 seconds, turn it on again. Try this 2 or 3
times.
If the machine does not start, contact the Philips SAECO hotline in your
country and tell them the code shown in the display. You can fi nd its
contact details in the warranty booklet by-packed separately or on
www.philips.com/support.
Insert the water dispenser to start dispensing. Press "ESC" to exit.
ENGLISH
" button to exit the stand-by mode.
63 63