Download Print this page

Scag Power Equipment CHEETAH Specifications

Hide thumbs Also See for CHEETAH:

Advertisement

Quick Links

Specifications

Engine Options:
Fuel Capacity/Design:
Travel Control:
Ground Speed:
Main Frame Construction:
Drive Tires:
Caster Tires:
Caster Wheel Bearings:
Front Caster Arm Design:
Drive System:
Hydraulic Oil Cooling:
Hydraulic Oil Filter:
Electrical System:
WWW.SCAG.COM
The Fastest Cat on Earth.
31hp Kawasaki FX, air-cooled, V-Twin, vertical shaft
32hp Briggs Vanguard Big Block, air-cooled, V-Twin
34hp Kawasaki FX, air-cooled, V-Twin, vertical shaft
15 gallons, dual fuel tanks mounted low on the mower to lower the center-of-gravity
and improve hillside stability and traction.
Twin "Quick-Fit" steering controls with gas dampers for smooth, precise
maneuverability. Adjustable to fit various operator sizes.
16mph forward, 8 mph reverse in high-range
12mph forward, 5 mph reverse in low-range
Double tube, steel frame, full-length, fully-welded
24 x 12 - 12, 4 ply
13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic
Tapered roller bearings
Bolt-on for easy replacement if necessary
Dual Hydro-Gear ZT-5400, 2-speed, integrated transaxles (2 separate units); 16cc
displacement pump; 21cc displacement wheel motor; 9" cooling fan on each unit
Yes - 9" fan on each unit
40 micron internal filter
12 Volt battery, 350 cca. Alternator, 20 amp charging. Solenoid shift starter.
(Continued)

Advertisement

loading

Summary of Contents for Scag Power Equipment CHEETAH

  • Page 1: Specifications

    21cc displacement wheel motor; 9” cooling fan on each unit Hydraulic Oil Cooling: Yes - 9” fan on each unit Hydraulic Oil Filter: 40 micron internal filter Electrical System: 12 Volt battery, 350 cca. Alternator, 20 amp charging. Solenoid shift starter. WWW.SCAG.COM (Continued)
  • Page 2 72": 7 wheels in 5 positions  Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings, backed by 3-year limited warranty Cutter Deck Height Adjustment: Foot pedal lift (3-position adjustable) with self-locking mechanism at transport position Cutting Range: 1.25”...