Ford FUSION HYBRID 2014 Owner's Manual page 398

Hide thumbs Also See for FUSION HYBRID 2014:
Table of Contents

Advertisement

A
My GO Time summary displays the next GO Time and cabin temperature
setting.
B
Estimated charge time limits displays the estimated minimum and maximum
times to fully charge the high-voltage battery and the battery's present state
of charge as a percentage of total capacity.
C
Charge profile and mode displays the charging profile and charging mode for
the vehicle's present location.
D
Charging status and actual times displays charging status with the charging
start time, end time, and duration.
My GO Time Summary
GO Time
This is the time and date of your next set
drive time. Your vehicle automatically
schedules charging and cabin conditioning
to finish by this time.
Temperature
This is the chosen cabin conditioning
setting for this GO Time.
Skip
This cancels the cabin conditioning for the
present GO Time. Once you touch Skip, the
GO Time and Temperature grey out, and
the LED illuminates on the Skip button.
Touch the button again to turn on the
cabin conditioning. This feature allows you
to ignore the present GO Time without
having to delete it or having to turn off the
entire schedule (see GO Time Schedule
later in this section). After the present GO
Time passes, the Skip feature resets.
Edit
This accesses your GO Time Schedule (see
GO Time Schedule later in this section).
Fusion/Mondeo (CC7)
MyFord Touch
395
(If Equipped)
The system also alerts you to any conflicts
by highlighting areas of the screen in
yellow. If your battery cannot have a full
charge by the scheduled drive time, the
system highlights your next GO Time and
Charge Complete time and a message
Charge at GO Time: under 100%
appears. This is normal; the vehicle is
informing you of the conflicting situation.
This notification only displays when the
gearshift selector lever is in position P.
Note: Charging occurs as soon as you plug
the vehicle in. The system limits cabin
conditioning to 15 minutes before your GO
Time.
To eliminate the conflict notification
immediately or to prevent a conflict in the
future, try the following:
Change the present GO Time to occur
later.
Plug the vehicle into a 240V charging
station instead of the 120V
convenience cord. Higher power
charging yields shorter charge times.
Plug the vehicle in sooner.
Estimated Charge Time Limits
Battery
This shows you the battery's current
charge displayed as a percentage. A
reading of 100% means the battery has a
full charge. A reading of 0% indicates the
battery has no plug-in energy left.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusion energi2014 fusion energi

Table of Contents