Ford FUSION HYBRID 2014 Owner's Manual page 105

Hide thumbs Also See for FUSION HYBRID 2014:
Table of Contents

Advertisement

Battery and Charging System (12 volt)
Message
Check Charging System
Low Battery Features
Temporarily Turned Off
Turn Power Off to Save
Battery
Battery and Charging System (High Voltage)
Message
Is Vehicle Plugged-In?
Ready to Drive
Unplug Prior to Starting
Vehicle
EV Now Not Available
Press OK to Enable
Engine
EV Now Battery
Powered
EV Later XX% Plug-in
Energy Reserved
Fusion/Mondeo (CC7)
Information Displays
The charging system needs servicing. If the warning stays on
or continues to come on, contact an authorized dealer as soon
as possible.
The battery management system detects an extended low-
voltage condition. The system will disable various vehicle
features to help preserve the battery. Turn off as many of the
electrical loads as soon as possible to improve system voltage.
If the system voltage has recovered, the disabled features
will operate again as normal.
The battery management system determines that the battery
is at a low state of charge. Turn the ignition off as soon as
possible to protect the battery. This message will clear once
your start your vehicle and the battery state of charge has
recovered. Turning off unnecessary electrical loads will allow
faster battery state-of-charge recovery.
Your vehicle needs confirmation it is unplugged before
allowing a start. You must make sure your vehicle is unplugged
and you respond to the message prompt before starting your
vehicle.
Your vehicle is ready to drive.
Your vehicle detects it is still plugged in and the power is
activated.
EV Now is unavailable.
You can press OK to enable the engine from EV mode.
EV Now is using battery power.
The percentage of EV plug-in energy stored for later use.
102
Action
Action

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusion energi2014 fusion energi

Table of Contents