American DJ Ruby Royal User Instructions page 7

Ruby Royal
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to activate. To
exit without making any adjustments press the MENU button.
SENS -
Sound sensitivity control.
1. Press the MENU button until "SENS" is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to confirm. To exit without making any
adjustments press the MENU button.
BLND
- This will control blackout
1. Press the MENU button until "BLND" is displayed, press ENTER.
2. Either "YES" or "NO" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. Press the ENTER button to confirm.
LED
- With this function the LED display will turn off after 2
minutes.
1. Press the MENU button until "LED" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select "ON" to keep the LED display on at all times, or "OFF"
to allow the LED display to turn off after 2 minutes. Press any button to
turn on the LED display again.
3. Press ENTER, and then press and hold the MENU button for at least
three seconds to confirm. To exit without making any adjustments
press the MENU button.
DISP
- This function will "flip" the LED display 180º.
American DJ - www.americandj.com - Ruby Royal Instruction Manual Page 13
© ®
System Menu Ruby Royal
1. Press the MENU button until "DISP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it again.
Press ENTER when you have decided on your desired display setup.
To exit without making any adjustments press the MENU button.
TEST
functions.
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. Either "PAN", "TILT" or "P T" will be displayed. Use the UP or DOWN
buttons to scroll to the function you would like to test and press
ENTER. The function will now run a self test. Press the MENU button
to exit.
FHRS
of the unit.
1. Press the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press the
MENU button to exit.
VER
1. Press the MENU button until "VER" is displayed. Press the ENTER
button and the software vesion will be displayed.
2. Press the MENU button to exit.
RSET
1. Tap the MENU button until "RSET" is displayed, press ENTER.
2. The fixture will now reset.
- This function will allow you to test the pan & tilt
- With this function you can display the running time
- This will display the software version
- Use this function to reset the unit.
American DJ - www.americandj.com - Ruby Royal Instruction Manual Page 14
© ®
System Menu