American DJ Accu UFO User Instructions page 7

Accu UFO
On-Board System Menu.
navigate system menu. This next section will detail the functions of
each command in the system menu.
To access the main menu press the MODE/ESC button on the front
of the unit. Tap the UP or DOWN butons until you reach function you
wish to change. When you reach the function you wish to change tap
the ENTER button. Again, tap the UP or DOWN buttons to change the
function. Once your changes are made, tap the ENTER button to lock
the change in the system, if the ENTER button is not selected within
eight seconds the system will automatically return to menu section. To
exit without making any changes tap the MODE/ESC button.
ADDR MAIN MENU -
ADDR
DMX Address Setting via control board -
1. Access the main menu.
2. Tap the UP button until "ADDR" is displayed, press ENTER.
4. Now the display will show "A001". Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on "A001", you can directly press the UP
or DN buttons to change the DMX start address.
TEST MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until "TEST" is displayed, press ENTER.
3. The display will show "T-01". You can now press the up
button and test the different channels.
4. Press MODE/ESC to exit.
American DJ - www.americandj.com - Accu UFO Instruction Manual Page 13
®
System Menu
The Accu UFO ccomes with an easy to
Accu UFO
PLAY MAIN MENU -
RUN
Run the unit in an Auto mode as a "master" in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a "master", or
as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUDI" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 14 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUTO" is displayed, press ENTER.
4. Now you can choose between "CLOSE", "HOLD" "AUTO", or
"AUDI". "HOLD" is the default setting.
5. Select the mode that you want the fixture to run in case of a
American DJ - www.americandj.com - Accu UFO Instruction Manual Page 14
®
System Menu