Stamina Magnetic Fusion 7100 Bike Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
Socket of
Pulse Extension
Wire(40)
STEP 7
Refer to the inset drawing. Plug the PULSE COIL WIRE(42) into the SOCKET of the PULSE EXTENSION
WIRE(40) located on the REAR FRAME(5). Clip the GROMMET PLUGS(43) onto both ends of the PULSE
COIL WIRE(42). Connect both ends of the PULSE COIL WIRE(42) to the PULSE SENSOR WIRES(44).
Push the plugs and excess wires back into the HANDRAIL(8) and secure with the GROMMET PLUGS(43).
STEP 8
Attach the SEAT(48) to the SEAT FRAME(7) with ROUND HEAD BOLTS(M6x1x15mm)(73). Attach the
BACK CUSHION(49) to the SEAT FRAME(7) with BUTTON HEAD BOLTS(M8x1.25x40mm)(64).
10