Timer Button - Gree Split Air Conditioner Owner's Manual

Operation of remote control
Names and functions of remote control buttons
NOTE: This Remote control is universal, it c o uld be used formany units, some buttons
of this control which are not availabl e to this unit will not be described below.
FAN
AIR
HUMIDITY
FILTER
TURBO
ON/OFF
FAN
Remote control
X-FAN
TURBO
HEALTH SAVE
HEALTH SAVE
HEALTH function:there is no this function
for this unit. If press this key, the main unit
will click, but it also runs under original status.
Save energy function: this unit has no this
function, press this button, the mian unit will
click, "SE" will be displayed on the LCD of
wireless remote control, fan speed automatically
rotates, when repress this button, the fan speed
will run at previous setting fan speed.
TURBO
Turbo button
Set turbo on or off(the characters of turbo
will appear or disappear ) by pressing this
key unde r cooling or heating mode.Once
energized, the unit will be defaulted to be
turbo off. This function can not be set under
auto, dehumidify or fan mode, and characters
of turbo won't appea r .
TIMER
AUTO
X-FAN
HEALTH
On the status of the unit on, press this
button to set timer off. On the status of
HOUR
ON/OFF
the unit off, press this button to set timer
off. Press this key once, words Hour on(off)
will appear and flicker. In which case, press
MODE
+/- button to adjust time (press+/- button
continuously to change timing value quickly ),
the setting time range is from 0.5 to 24 hr. ;
press this key once again to fix the time,
then remote controller will send out the signal
immediately and hour on/off will stop flickering.
TEMP
TIMER
If the time of that no press timer button
SLEEP LIGHT
under flickering status is above 5s,the timer
setting will quit. If the timer has been set,
press this button once again to quit it.
button
There is no this function for this unit. If press
this key, the main unit will click, but it also
runs under original status.

Timer button