Introduction For Special Function; Operation-General/Optional Operation - Gree Split Air Conditioner Owner's Manual

Operation of remote control
Guide for operation-general operation
1.Press ON/OFF button to start the unit after powering
the main unit on.(Note: Power the unit on every time,
the big -guide louver and small-guide louver will be
closed firstly.
)
2.Press MODE button to select desired running mode.
3.Press +/ - button to set the desired temperature
(It is unnecessary to set the temperature at AUTO mode)
4. Press FAN button to set fan speed, the AUTO FAN,
LOW, MID or HIGH could be selected.
5. Press button to set swing mode.
Guide for operation-optional operation
1.Press SLEEP button, set the sleep mode.
2.Press TIMER button, then press +/- button, to set the
cheduled timer on or timer off.
3. Press light button to control displayer light on or off.
4. Press X-FAN button to set X-FAN function on or off.
5. Press turbo button to set this function on or off.
About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit
is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 10 min. at low speed. In this period,
press X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
.

Introduction for special function

ON/OFF MODE
FAN
X-FAN
TEMP TIMER
TURBO SLEEP LIGHT
ON/OFF MODE
FAN
X-FAN
TEMP TIMER
TURBO SLEEP LIGHT