Installation - Whirlpool AMW 732 Installation, Quick Start

MOUNTING THE APPLIANCE
PRIOR TO CONNECTING
C
on the rating plate corres-
HECK THAT THE VOLTAGE
ponds to the voltage in your home.
D
O NOT REMOVE THE MICROWAVE INLET PROTECTION
located on the side of
PLATES
the oven cavity wall. They
prevent grease & food parti-
cles from entering the micro-
wave inlet channels.
E the oven cavity is
NSURE
empty before mounting.
E
NSURE THAT THE APPLIANCE IS NOT DAMAGED
that the oven door closes firmly against the door
support and that the internal door seal is not da-
maged. Empty the oven and clean the interior
with a soft, damp cloth.
AFTER CONNECTING
T
HE OVEN CAN BE OPERATED ONLY
firmly closed.
2

INSTALLATION

F
OLLOW THE SUPPLIED
structions when installing the appliance.
D
O NOT OPERATE THIS APPLIANCE
mains cord or plug, if it is not working properly,
or if it has been damaged or dropped. Do not im-
merse the mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical shock, fire
or other hazards may result.
D
O NOT USE EXTENSION CORD
.
Check
T
if the oven door is HE EARTHING OF THIS APPLIANCE
manufacturer will accept no responsibility for in-
jury to persons, animals or damage to objects ari-
sing from the non-observance of this require-
ment.
The manufacturers are not liable for any pro-
blems caused by the user's failure to observe
these instructions.
separate mounting in-
if it has a damaged
:
I
F THE POWER SUPPLY CORD IS TOO SHORT
qualified electrician or serviceman install
an outlet near the appliance.
is compulsory. The
, have a