Register/De-Register - RCA 25252 User Manual

Register
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Register.
2. Press SELECT soft key.
3. Press and hold the Page button on base for
4. "Registering" displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows "Registration
complete" for 2 seconds and emits a confirmation tone.
6. If the registration is failed (i.e. timeout), the handset shows
"REGISTRATION FAILED!" for 2 seconds and emits an error tone.
Remove Handset
De-registration cancels registration. During the de-registration process,
keep the handset near the base.
WARNING: It is not recommended that a handset be
deregistered unless absolutely necessary because once a
handset is deregistered, that handset's telephone features
cannot be used until the handset is re-registered.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Remove handset.
2. Press SELECT soft key. "Remove handset?" shows on the display.
3. Press the YES soft key to confirm de-registration.
"Press "REG" to initiate registration" in the handset.
NOTE: You can press the REG soft key to enter the registation mode again.
De-Register (Only applicable for base)
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Deregistration.
2. Press SELECT soft key. The list of all registered handsets will be shown,
and use the VOL (- or +) button to scroll to your selection.
3. Press the SELECT soft key. "Remove handset?" shows on the display.
Press YES soft key to confirm de-registration.
then shows "Press "REG" to initiate registration" in the handset.
Add Headset (only applicable for base)
NOTE: This wireless headset option is only compatible with the RCA
25065RE1, 25265RE2 and 25270RE3 headsets.
From the Phone Setting Menu:
1. Press the vol(- or +) button to scroll to Add Headset;
2. Press the SELECT Sofykey. The screen will display Pairing...Please wait.
3. On the headset, press and hold the Talk On/Off button together with the
Volume+ button for 3 seconds. The LED indicators will begin blinking in
an alternate red and blue pattern.
4. If the registration is successful, a blue LED on the Headset will flash.
NOTE: Only one cordless Headset may pair with a base unit.
Programming the Telephone
Register HS Registering... shows in the display.
about 3 seconds
then shows
base emit a confirm tone
17