Register; Remove Handset; De-Register - RCA 25270 User Manual

Register

From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Register.
2. Press SELECT Soft key. The screen displays Press base unit page button until beep .
3. Press and hold the page button on base for 5 seconds.
4. Registration displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows Registration complete for 2
seconds and emits a confirmation tone.
6. If the registration is failed (i.e. timeout), the handset shows REGISTRATION FAILED! for 2
seconds and emits an error tone.

Remove Handset

De-registration cancels registration. During the de-registration process, keep the handset
near the base.
WARNING: It is not recommended that a handset be deregistered unless
absolutely necessary because once a handset is deregistered, that
handset's telephone features cannot be used until the handset is
re-registered.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Remove handset .
2. Press SELECT Soft key. The screen displays Remove handset? .
3. Press the YES Soft key to confirm de-registration. The screen displays Saved and then
shows Press REG to initiate registration in the handset.
NOTE: You can press the REG Soft key to enter the registation mode again.

De-Register

(only applicable for base)
From the Phone Setting Menu:
1. Press the vol (- or +) button to scroll to the Deregistration .
2. Press SELECT Soft key. The list of all registered handsets will be shown, and use the
vol (- or +) button to scroll to your selection.
3. Press the SELECT Soft key. The screen displays Remove handset?.
4. Press YES Soft key to confirm de-registration. The screen displays Saved and then
shows Press REG to initiate registration in the handset.
18