Kenwood C-717DV Instruction Manual page 29

DVD player operation
"NO DISC" is displayed.
\ Insert a disc correctly (label side up).
\ Clean the disc.
\ Use a new or readable disc.
\ Wait until the moisture condensation at the
lens has cleared.
NO picture.
\ Place the disc on the disc tray correctly inside
the guide.
\ Clean the disc.
\ Select the appropriate video input model on
the TV so the picture from the unit appears on
the TV.
USB operation
"NO USB" is displayed.
\ Press
button again after pressing
\ Insert the USB device properly.
"NOT SUPPORT" is displayed.
\ Press
button again after pressing
Cannot play.
\ Check if the USB mass storage class-
compatible digital audio player is turned ON.
iPod/iPhone operation
"NO iPod" is displayed.
\ Insert the iPod/iPhone properly.
Does not function properly.
\ Disconnect the iPod/iPhone and connect it
again.
\ Check the software version of the iPod/iPhone.
If it is not the latest one, update it.
SD operation
"NO SD" is displayed.
\ Press
button again after pressing
\ Insert the SD card properly.
"NOT SUPPORT" is displayed.
\ Press
button again after pressing
Cannot play.
\ Insert an SD card containing music fi les.
          A ' P I N K U J  K P F F  
D.AUDIO operation
Kenwood digital audio player cannot be
controlled from the main unit or remote control
unit.
\ Connect using the connection cable
(separately available).
\ Check if a compatible model is connected.
Remote control unit
Does not function properly.
\ Replace the batteries.
\ Remove the obstacles.
\ Move closer to the system when using the
remote control and make sure that you are
pointing at unit's remote sensor.
"ON SCREEN" is displayed on main unit.
\ Confi rm the operation on the monitor. Operate
on the monitor if necessary.
button.
button.
button.
button.
29
English