Using the D.AUDIO
Playback of Digital Audio Player
Kenwood digital audio player can be connected to
play audio fi les in it.
1
Connect an the player.
Connect a Kenwood digital audio player to the
[D.AUDIO] connector using an optional cable or
adapter. Also read the instruction manual for the
connected component.
Kenwood digital audio player
Optional cable
2
Press D.AUDIO/iPod button once or more to
select "D.AUDIO".
3
Turn the connected player ON and start playing it.
Basic operations
Operation type
Operation
Press STOP 7 button.
To stop playback
Press 6 button.
To interrupt
playback
Press again to resume playback.
Press and hold 4 or ¢ button for
To search for a
particular passage
more than 2 seconds.
during playback
To select a track/ file Press 4 or ¢ button in play or pause
mode.
Press FOLDER/P.CALL A or B button
To select a folder
in play or pause mode.
⁄
• Some control operations may be unavailable depending on
the connected player.
A ' P I N K U J K P F F
Using the AUX
Playing an external component
An external component can be connected to AUX IN
of this unit and played back.
1
Connect an external component.
Connect an external component to the [AUX IN]
connector on the rear of this unit.
2
Press AUX button.
3
Start playing the connected external
component.
23
English