Verizon MI424WR User Manual page 15

FiOS Router User Manual
Reset Button
To restore the FiOS Router's factory default settings, press and hold the Reset
button for approximately ten seconds. The reset process will start about ten
seconds after releasing the button. When the FiOS Router resets, all the lights on
the front panel turn off, and then some of the lights start flashing. The FiOS Router
has completed its reset process when the Power light glows steadily green.
Caution! Do not unplug the Power cord from the FiOS Router during the
reset process. Doing so may result in the loss of the FiOS Router's configuration
information. If this occurs, reset the FiOS Router again.
LAN Ethernet Ports (4)
The LAN Ethernet ports connect devices to the FiOS Router via Ethernet cables
to create a local area network (LAN). The LAN Ethernet ports are 10/100/1000
Mbps auto-sensing ports, and either a straight-through or crossover Ethernet
cable can be used when connecting devices to the ports.
WAN Ethernet Port
The WAN Ethernet port connects the FiOS Router to the ISP using an Ethernet cable.
USB Ports
The USB ports provide up to 5 VDC for attached devices (to charge a cell phone,
for example). In the future, with a firmware release upgrade, the USB host
functionality will be available for devices such as external storage and cameras.
Wireless Antenna
The FiOS Router's wireless antenna is used to transmit a wireless signal to other
wireless devices on its wireless network.
15
© 2010 Verizon. All Rights Reserved.