Verizon MI424WR User Manual page 12

1
Introduction
1.4 Getting to Know the FiOS Router
Power
The Power LED displays the FiOS Router's current status. If the Power light glows
steadily green, the FiOS Router is receiving power and fully operational. When
the Power light flashes rapidly, the FiOS Router is initializing. If the Power light is
not illuminated or glows red when the Power cord is plugged in and the Power
switch is turned on, the FiOS Router has suffered a critical error and technical
support should be contacted.
WAN Ethernet
The WAN Ethernet LED illuminates when the FiOS Router is connected to the
Internet via Ethernet. If flashing, data traffic is passing across the port.
WAN Coax
The WAN Coax LED glows steadily or flashes when the FiOS Router is connected
to the Internet via coaxial cable.
Internet
When the Internet LED glows steadily green, the FiOS Router is connected to the
ISP (Internet Service Provider). If it glows amber, there is a physical connection
to the ONT (Optical Network Terminator), but authentication has not taken place
(i.e., no IP address is present).
LAN Ethernet (1, 2, 3, 4)
The LAN Ethernet LEDs illuminate when the FiOS Router is connected to a local
network via one or more of its Ethernet ports. If flashing, data traffic is passing
across the port(s).
LAN Coax
The LAN Coax LED glows steadily or flashes when the FiOS Router is connected
to a local network via its Coax port.
© 2010 Verizon. All Rights Reserved.
12