Setup; Plug In And Turn On - Microsoft Surace RT User Manual

Setup

Ready to set up Surface? Grab your Surface and let's go!
Note It's best to have a wireless network available when you set up Surface.

Plug in and turn on

Plug in Surface and turn it on. Here's how:
1. If you have one, attach the Touch Cover or Type Cover keyboard to your Surface. When the keyboard
gets close to Surface, it clicks into place.
2. Flip out the kickstand on the back of Surface.
3. Plug the power cord into a wall outlet or power strip.
4. Connect the power cord on the lower right side of your Surface.
The connector clicks into place (either direction works). The small light at the end of the connector
means Surface is getting power.
5. Press and release the power button on the top right edge of your Surface.
© 2013 Microsoft Page 6