Foot Switch Mode; System Dump; Dump Current; Dump All - Kawai MP8 Owner's Manual

8.2.12

8.3 System Dump

8.3.1 Dump Current

8.3.2 Dump All

Foot Switch Mode

Note:
When the value is "Setup+", FootSW CC# page won't be displayed.
Note:
Loading the data back to the MP8 will change the current settings.
SETUP and SYSTEM data will not change. You can use this function to
temporarily change the setting from your sequencer. If you want to
save the setting, you must use the STORE procedure and save as Setup.
Note:
4 5