Transmit Midi Program Change - Kawai CL30 Owner's Manual

NOTE:
You can assign any sound of the CL30 piano to any channel in the way
you like by sending the correct Program Change Number to the CL30
piano from an external MIDI device. See page 30 for assignment of
sound and program number.
(1) Press the "MULTI" key while holding down the METRONOME
and SOUND SELECT buttons.
(2) While still holding down the METRONOME and SOUND SELECT
buttons, pressing the "off" key sets the Multi-Timbral mode to "off".
If you press the "on" key, this function returns to "on".

9. TRANSMIT MIDI PROGRAM CHANGE

You can set the CL30 piano if it should transmit Program Change
Numbers via MIDI when the sound is changed on the control panel.
(1) Press the "PROGRAM" key while holding down the
METRONOME and SOUND SELECT buttons.
(2) While still holding down the METRONOME and SOUND SELECT
buttons, pressing the "off" key sets the CL30 piano not to transmit the
program change data corresponding to the sound selected on the panel.
If you press the "on" key, this function returns to "on" and selecting a
sound will transmit the data.
(3) You can also transmit the desired program change number directly
by entering the number as a three digit number by using the number
keys while holding down the METRONOME and SOUND SELECT
buttons.
– 27 –