Advertisement
INSTALLATION INSTRUCTIONS
7. PREPARE INSIDE BASEPLATE FOR INSTALLATION:
A. Remove hinge screw from inside
baseplate assembly.
8. INSTALL OUTSIDE ESCUTCHEON AND INSIDE BASEPLATE ASSEMBLY:
Install adapter plate and
standoff as shown.
Latch
Make sure latch
tabs engage the
retractor as
shown:
Retractor
FORM 59007-C
NOTE: BATTERY HOLDER
SHOWN IN PLACE. IT MAY
BE REMOVED TO PREVENT
IT FROM FALLING OUT
DURING INSTALLATION.
Assemble outside escutcheon, latch guard and inside
escutcheon onto door. Pass wiring harness through
existing hole as shown.
PAGE 5
SCHLAGE KC5196-R/KC5196-2-R
B. Swing hinge away from baseplate.
Reinstall latchguard:
6-2007
Advertisement
