Kawai CL36 Owner's Manual page 37

10. Insert the Music Rack (E) into the holes on
the top of the Main Unit (A).
11. Connect the Pedal Board pedal cable to
the PEDAL terminal on the back side of
the Main Body, ensuring the notched plug
faces upward. Fix the cable in place using
the Clamps (r) and binders, as shown in
the illustration.
12. Connect the AC Adaptor (F) to the DC IN
terminal on the back side of the Main Body,
then connect the Power Cord (G) to the AC
Adaptor. Fix the cable in place using the
Clamps (r) and binders, as shown in the
illustration.
13. Turn the Adjuster (j) installed on the bottom
of the Pedal Board (C) anti-clockwise,
extending the bolt until it makes contact
with the floor and supports the pedal
fi rmly.
 When moving the instrument,
Caution
ensure that the unit is lifted
clearly from the floor (i.e. not
dragged/pushed) in order to avoid
damaging the pedal board.
14. Attach the headphone hook to the
underside of the Main Unit using the two
small screws supplied.
Main Unit (A) Main Unit (A)
Binder Binder
(F) (F)
Clamp (r) Clamp (r)
Pedal Board (C) Pedal Board (C)
Page
Music Rack (E) Music Rack (E)
Binder Binder
Pedal Cable Pedal Cable
Clamp (r) Clamp (r)
Adjuster (j) Adjuster (j)
Floor Floor
37
7