Mounting The Lens To The Camera; Network Deployment - Vivotek IP8161 Quick Installation Manual

3

Mounting the Lens to the Camera

1. Mount the lens by turning it clockwise onto the camera mount until it stops. If
necessary, turn the lens counterclockwise slowly until it gets the best attitude.
2. Connect the DC-iris control cable to the socket.
1
For further setup, please refer to the lens' instruction manual inside the
lens package.
4

Network Deployment

General Connection (without PoE)
1. If you have external devices such as sensors and alarms, connect them to the
general I/O terminal block.
2. Connect the camera to a switch via Ethernet cable.
3. Connect the power cable from the Network Camera to a power outlet.
3
2
5
2
1
1: Power +12V
2: Digital output
3: Digital input
4: Ground
5: AC 24V
6: AC 24V
7: RS485+
8: RS485-
Ethernet Switch