Remove The Microsd Memory Card - Zte C79 User Manual

Firmly insert the microSD card into the slot until it clicks into place.
2.
Close the rubber memory card access door.
3.

Remove the microSD Memory Card

Open the rubber microSD access door located on the side of the phone and rotate it 90
1.
degrees.
Push the memory card downwards to release it from the slot.
2.
Pull the memory card completely out of the microSD slot on the handset.
3.
Close the rubber memory card access door.
4.
Note: Do not remove the memory card while reading or writing to the card. Doing so may
cause data corruption on the card or phone. If possible, insert and remove the memory card
while the phone is powered off.
To power on the phone, press and hold the End key for at least 3 seconds. If the handset
lock code has been activated, the phone will prompt to enter the code. The default password
for an inactivated phone is 1234. Once you have activated your handset, the default lock code
will be the last 4 digits of your phone number.
It is also possible that the lock code has been updated by the user. If the updated lock code is
lost or forgotten, please contact your service provider.
To power off the phone, press and hold the End key for at least 3 seconds from the idle
screen.
Warning: Do not power the phone on when wireless phone use is prohibited, or when it may
cause interference or danger.
C79 User manual
29