Table of Contents
Advertisement
Note: Maximum Memory Card capacity supported is 2 GB. Your phone may work with a
microSD of greater capacity, but even if so, it may not be able to access beyond the 2 GB limit.
Insert the microSD Memory Card
Open the rubber microSD access door located on the top of the phone and rotate it 90
1.
degrees.
Firmly insert the microSD card into the slot until it clicks into place.
2.
Close the rubber memory card access door.
3.
Remove the microSD Memory Card
Open the rubber microSD access door located on the top of the phone and rotate it 90
1.
degrees.
Push the memory card downwards to release it from the slot.
2.
Pull the memory card completely out of the microSD slot on the handset.
3.
Close the rubber memory card access door.
4.
Note: Do not remove the memory card while reading or writing to the card. Doing so may
cause data corruption on the card or phone. If possible, insert and remove the memory card
while the phone is powered off.
Power On/Off your Phone
To power on the phone, press and hold the Power key for at least 3 seconds. If the handset
lock code has been activated, the phone will prompt to enter the code. The default password
for an inactivated phone is 1234. Once you have activated your handset, the default lock code
will be the last 4 digits of your phone number.
C90 User manual
29
Advertisement
Table of Contents
