B
N
S
ASIC
ETWORK
ETTINGS
6.1.5 Filter
Note:
This section applies to Universal Repeater mode.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this section without a
thorough understanding of the parameters.
When Enable Wireless Access Control is selected, only wireless clients with MAC addresses listed in the table are allowed
to connect to the wireless network.
Enable Wireless Access Control
Description
Enter a description of the device allowed to connect to the network.
MAC Address
Enter the MAC address of the wireless device.
6-25
F
ILTER