Manual Control Options; Dmx Control Mode; Setting The Dmx Address - Chauvet LEDsplash Jr LED-PAR83 User Manual

M an ua l C on t r o l Opt io ns
With all dipswitches set to the OFF position,
dipswitches 1 through 8 will control 3 levels of
intensity for red and green LED's and 2
levels of intensity for blue LED's.
This allows you to statically set
a color of preference without
the use of a controller. By
setting different intensities for
all 3 led colors you can
compose a color of your
choice.

DMX Control Mode

Operating in a DMX Control mode environment gives the user the greatest flexibility when it comes to
cu stomizing or creating a show. In this mode you will be able to control each individual trait of the
fixture and each fixture independently. The LEDsplash™ Jr. uses 4 channels of control.
1. Enable DMX control by setting dipswitc
address each fixture accordingly.
Set ting the D M X ad dr es s
This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start
address" from 1 to 511. A fixture requiring one or more channels for control begins to read the data
on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels
of DMX and was addressed to s
102, 103, 104, 105 and 106. Choose start addresses so that the channels used do not overlap and
notate the start address selected for future reference.
If this is your first time addressing a fixture
to the Appendix Section and read the heading
will help you understand its use.
LED-PAR83 User Manual
Manual Intensity Control
RGB Mix
RED
ON
ON
ON
h # 10 to the ON positio
tart on DMX channel 100, would read data from channel
using the DMX-512 control protocol than I suggest jumping
"DMX Primer". It contain
8
GREEN
BLUE
n. Use dipswitches 1 through 9 to
s: 100, 101,
s very useful info rmation that
2008-11-17 9:40:00 AM