Vax Rapide XL Easy Manual page 5

V-027M User Guide 7/9/06 15:00 Page 4
Pre-treating your carpets with
the pre-treatment wand and
solution
4
1
Remove solution tank cap.
Pre-treating your carpets with the
pre-treatment wand and solution
7
9
CAUTION: Maximum water
temperature 40°C.
Remove the clean water tank cap
and put in a safe place. Slowly fill the
clean water tank with warm tap water
(max 40°C) and replace the cap.
5
CAUTION: Do not overfill. You should leave
1-2 cm of air space.
Fill the tank with pre-treatment solution.
8
Return clean water tank by lining
up the grooves of the clean water
tank with the support posts on the
inside of the handle. Rock clean
water tank inward until it locks into
place.
6
Replace the solution tank cap.
Return the solution tank to the
cleaner making sure the solution
tube lines up with the groove in the
back of the solution tank. Firmly
press the solution tube into the plug
opening of the solution tank.
9
Attach the pre-treatment wand to
the pre-treatment water supply port
at the back of the machine. Press
firmly until it locks into place.
N.B Once the pre-treatment wand
is attached it can remain in place
between pre-treatments