Features - Kidde 900-0122-UK User Manual

Battery operated combination smoke & carbon monoxide alarm with 2-led display and peak level memory
Table of Contents

Advertisement

Features

• Permanent independent smoke and carbon monoxide
sensors.
• Smoke alarm takes precedence when both fire and
carbon monoxide are present.
• Alarm/Voice message warning system that alerts you of the
following conditions in the manner described below, thus
eliminating any confusion over which alarm is sounding:
FIRE: The alarm/voice pattern is three long alarm beeps
followed by the verbal warning message "FIRE! FIRE!".
This pattern is repeated until the smoke is eliminated. The
red LED light will flash while in alarm/voice mode.
CARBON MONOXIDE: The alarm/voice pattern is four
short alarm beeps followed by the verbal warning message
"WARNING! CARBON MONOXIDE!" After four
minutes the alarm/voice pattern will sound once every
minute until the unit is reset, or the CO eliminated. The
red Light Emitting Diode (LED) light will flash while in
alarm/voice mode.
LOW BATTERY: When the batteries are low and need
replacing the red LED light will flash and the unit will
"chirp" one time, followed by the warning message "LOW
BATTERY." This cycle will occur once every minute for
the first hour. After the first hour the red LED light will
continue to flash every minute accompanied by the
"chirp" only sound. The voice message "LOW
BATTERY" will sound once every fifteen minutes during
the "chirp" only cycle. This will continue for at least seven
days.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents