X10 XPMT4 Owner's Manual
  1. Manuals
  2. Brands
  3. X10 Manuals
  4. Timer
  5. XPMT4
  6. Owner's manual
X10 XPMT4 Owner's Manual

X10 XPMT4 Owner's Manual

Mini timer
Hide thumbs Also See for XPMT4:
Table of Contents

Advertisement

Quick Links

PRO
Model XPMT4
Mini Timer
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for X10 XPMT4

Summary of Contents for X10 XPMT4

  • Page 1 Model XPMT4 Mini Timer Owner's Manual...

  • Page 2: Table Of Contents

    Channel number 1 also activates an internal buzzer so you can us it as an alarm Troubleshooting ....................16 clock too! You can program up to 8 X10 PRO Modules from the Mini Timer and you also have instant control of 8 Modules.

  • Page 3: Introduction

    NOTE: you must use the power supply that came with the Mini Timer. event. The power supply contains circuitry required to control your X10 PRO modules, so you CANNOT replace it with a regular 12V power supply. Alarm. The number 1 button also sets the time for the internal alarm buzzer.

  • Page 4: How To Program A Timed Event

    Mini Timer. 1. Install and set up all of your X10 PRO Modules referring to the instructions included Clear Button. Pressing this (in the Prog/Review Mode) cancels the On time with them. Be sure to turn off the power at the main circuit breaker panel when or Off time being displayed.

  • Page 5: Programming On And Off Times

    Setting up the Mini Timer Programming ON and OFF times Setting something to happen every day at the same time Setting a timed event to occur Once only After you have installed all of your Modules and checked that they are working instantly If (within 4 seconds after setting an On or Off time) you press the “Mode”...

  • Page 6: Reviewing Timer Events

    Programming ON and OFF times Programming ON and OFF times Reviewing timer events If the display shows FULL If FULL is displayed when you try to enter a programmed time, this means that you have Set the Mode Switch in the “Prog Set/Review” position. If no events exist in memory 0:00 is tried to enter an additional time when you have already used up all the available memory.

  • Page 7: Alarm Settings

    To Cancel/Snooze the wake-up alarm When you fi rst plug in the Mini Timer it controls X10 PRO Modules set to Housecode A. If When the alarm sounds at the time you have set, you can cancel it in one of two ways: you want to change the Housecode: 1.
  • Page 8 Code setting on the Module. If the Module turns On and Off you can unplug the Module or Timer and move it to its permanent location. Mini Timer and move it to its permanent location. If you can’t control the module, contact www.x10.com/support for help. If you can’t control the module, contact www.x10.com/support for help.

  • Page 9: Troubleshooting

    Mini Timer when the intercom is in use. If the Intercom system has its A wide range of switch and control modules are available from X10 PRO, all of which can own separate wiring it will not cause a problem.
  • Page 10 NOTES NOTES...
  • Page 11 2 YEAR LIMITED WARRANTY x10pro-usa.com (X10PRO-USA), a division of Authinx Inc., warrants this product to be free from defective material and workmanship for a period of 2 years from the original date of purchase at retail. X10PRO-USA agrees to repair or replace, at its sole discretion, a defective product if returned to X10PRO-USA within the warranty period and with proof of purchase.

This manual is also suitable for:

Pro xpmt4

Table of Contents