Playing back recorded images
1
Press the PLAY button on the front panel.
You can play back images even during recording.
2
Press the PAUSE button to pause playback.
(Still image playback)
3
Press the STOP button to stop playback.
Notice
•
When you change the multiplexer, playback direction, or playback speed during playback, a black screen may be displayed.
•
When you change the multiplexer or the playback-related settings during playback, or when you play back data where
recording status was changed due to change of recording operation, a black screen may be displayed or image dropout may
occur.
•
This recorder uses the motion picture compression format. Due to this, the recorder may take time to display the playback
picture.
Tips
•
After the power is turned on, playback starts from the oldest recorded data. Otherwise, playback starts from the point where it
was stopped last time.
•
When the PAUSE/JUMP TO END button is pressed while the playback is stopped, images around the end of the latest
recorded data are played back in the still image playback mode.
•
To resume playback during still image playback, press the PAUSE or PLAY button.
•
When you press the camera number button during still image playback in the single screen mode, the image from the camera
corresponding to the button you pressed is displayed.
C
onvenient function
Selecting the device or audio to be played back
1
Press the SET UP button on the front panel or left-click the mouse to display <Main menu>.
Change the playback device while playback is stopped.
2
Select "Device selection" to display the <Change audio and play device> screen.
3
Under "Play device selection," select the button of the device you want to play back. (You cannot select devices that are not
set.)
"HDD (Normal)" : Plays back the data in the normal recording area.
"HDD (Alarm)" : Plays back the data in the alarm recording area.
"HDD (Emergency)" : Plays back the data in the emergency recording area.
"HDD (Preliminary)" : Plays back the pre-alarm or pre-emergency recording data.
"HDD (Copy)" : Plays back the data in the copy device.
"HDD (Archive)" : Plays back the data in the archive device.
"DVD/CD" : Plays back the data on a DVD/CD disc in an external drive.
"USB memory" : Plays back the data in a USB memory device.
When you change the playback device on the <Change audio and play device> screen and then start playback with that
screen being displayed, data in the device that was selected before the change are played. Before starting playback, close
the screen.
4
Under "Audio channel selection," select whether or not to output the audio.
The audio setting made here is refl ected to both the live display and playback.
"On" : Outputs the audio.
"Off" : No audio is output.
2
1
3
Operations
13