Multi Function Buttons - Uniden MC1010 Operating Manual

MULTI FUNCTION BUTTONS

MC1010
17
STEP - SCAN
This key is used to step through the channels that are stored in memory- or - when
pressed and held, this key also starts and stops the Memory SCAN mode.
Press STEP to step through the channels that are stored in memory.
Press and hold STEP to begin scanning the channels in memory.
18 H/L - (High / Low)
This key allows you to switch between high transmit power (25 watts) or low transmit
power (1 watt).
19 MEM - (Memory)
This key enters the displayed channel into scan memory.
20 16 - Dual Watch
This key allows rapid access to Emergency Channel 16 - or - when pressed and held
Dual Watch will be switched On/Off.
Press 16 to instantly access Channel 16 communications.
Press and hold 16 to turn Dual Watch On/Off.
21 LITE - (Light)
This key is used to turn the LCD back light on and off.
M E M
L I T E STEP
DUAL
1 6 H / L
21 20 19 18 17
5
1 2
0 3
SCAN
SQUELCH