Table of Contents
Advertisement
Select Settings > Navigation > Calculation Mode.
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
• Select Off Road to calculate point-to-point routes (without
roads).
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation.
2
Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Starting a Route to a Saved Location
1
Select Where To? > Saved.
2
If necessary, select a category, or select All Saved Places.
3
Select a location.
4
Select Go!.
Your Route on the Map
The speed limit feature is for information only and does not
replace your responsibility to abide by all posted speed limit
signs and to use safe driving judgment at all times. Garmin will
not be responsible for any traffic fines or citations you receive
for failing to follow all applicable traffic laws and signs.
The route is marked with a magenta line. A checkered flag
marks your destination.
As you travel, the device guides you to the destination with
voice prompts, arrows on the map, and directions at the top of
the map. If you depart from the original route, the device
recalculates the route and provides new directions.
A data field displaying the current speed limit may appear as
you travel on major roadways.
Using the Map
1
Select View Map.
2
Select anywhere on the map.
3
Select an option:
• To zoom in or out, select
• To switch between North Up and 3-D views, select .
• To view specific categories when not navigating a route,
select
.
• To center the map on your current location, select
Adding a Point to a Route
Before you can add a point, you must be navigating a route.
1
From the map, select
2
Search for a location.
3
Select a location.
4
Select Go!.
Navigation
NOTICE
or
.
> Where To?.
5
Select Add to Active Route.
Taking a Detour
Before you can take a detour, you must be navigating a route
and you must add the detour tool to the map tools menu
(Customizing the Map
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1
From the map, select
2
Select an option.
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
Stopping the Route
From the map, select
Viewing Route Activity
Viewing a List of Turns
While navigating a route, you can view all of the turns and
maneuvers for your entire route and the distance between turns.
1
While navigating a route, select the text bar on the top of the
map.
2
Select a turn.
The details for the turn appear. If available, an image of the
junction appears for junctions on major roadways.
Viewing the Entire Route on the Map
1
While navigating a route, select the navigation bar at the top
of the map.
2
Select
> Map.
Viewing the Next Turn
While navigating a route, a preview of the next turn, lane
change, or other maneuver appears in the upper-left corner of
the map.
The preview includes the distance to the turn or maneuver and
the lane in which you should be traveling, if available.
From the map, select
Viewing Junctions
While navigating a route, you can view the junctions on major
roadways. When you approach a junction in a route, the image
of that junction appears briefly, if available.
From the map, select
About Up Ahead
You can view upcoming businesses and services along your
route or the road on which you are traveling.
Services are listed under tabs by category.
Gas
Food
Lodging
Restrooms
.
Parking
Banks and ATMs
Finding Upcoming Points of Interest
1
From the map, select
2
Select a tab.
3
Select a point of interest.
Tools).
> Change Route.
>
.
to view the next turn on the map.
to view the junction, if available.
> Up Ahead.
5
Hide quick links:
Advertisement
Table of Contents
