Firmware Upgrade - Speco mobile dvr User Manual

4.5.8 FIRMWARE UPGRADE

At the SYSTEM menu,
Move the cursor to the FIRMWARE UPGRADE
using the ▲,▼ buttons.
Press the ENTER button when the cursor is on
the FIRMWARE UPGRADE and the following
screen appears.
Select YES and then press the ENTER button to
begin the firmware upgrade. The USB flash
memory with the upgrade file must be inserted
into the front USB port.
If not, move the cursor to "NO" and then press
the ENTER button.
Use the ▲ ▼ buttons to move the cursor.
,
To exit this FIRMWARE UPGRADE screen,
press the ESC button.
The DVR will start reading the available upgrade
file. Once the file is found, it will check for the
integrity of the file.
58